2018-09-06, 06:47 PM
(This post was last modified: 2018-09-06, 06:53 PM by seandepagnier.)
so far pypilot has internal signalk it uses. Try running signalk_client from the console.
If you want to get this into the node signalk, it needs translation since the fields are different, but we should do it.
Currently translates heading, pitch and heel. Any other useful fields besides voltage which can be translated?
pypilot reads what is powering the motor controller. So if you have a 48 volt lithium battery, but power the pypilot controller through a 12 volt regulator, it would not be the battery voltage.
If you want to get this into the node signalk, it needs translation since the fields are different, but we should do it.
Currently translates heading, pitch and heel. Any other useful fields besides voltage which can be translated?
pypilot reads what is powering the motor controller. So if you have a 48 volt lithium battery, but power the pypilot controller through a 12 volt regulator, it would not be the battery voltage.