This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
need to restart NMEA0183 Multiplexer to start GPS Position / Calibrating Compass
#4
Hej,
i was now on my Boat and started openplotter in debug mode, but there comes no errors. terminal is returning the following text.
after starting opwnplotter there is nothing in the terminal. The inspector Window tells me in the footer "failed to connect to localhost:10110 error 111 trying to reconnect.
if i press then the restart button on the nmea0183 tab gps works until the next restart the pi. the Same is on the I2C Tab with "reset Weather logging" and also i have to uncheck und check again the "enable ais nmea generation" box .
terminal:

Code:
python /home/pi/.config/openplotter/openplotter.py
signalk-server running at 0.0.0.0:3000

Found 1 device(s):
 0:  Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Tuner gain set to 49.60 dB.
Tuner error set to 30 ppm.
Tuned to 162227000 Hz.
Oversampling input by: 21x.
Oversampling output by: 1x.
Buffer size: 8.13ms
Exact sample rate is: 1008000.009613 Hz
Sampling at 1008000 S/s.
Output at 48000 Hz.
!AIVDM,1,1,,A,139M=qPP000iLgdNu7?P0?vV08=?,0*4C
!AIVDM,1,1,,A,139SQR00?w<tSF0l4Q@>40=v0d0;,0*0F
!AIVDM,1,1,,A,139M=qPP000iLgdNu7?P0?w<06PD,0*3F
!AIVDM,1,1,,A,139SQR00?w<tSF0l4Q@>40=v0d07,0*03
!AIVDM,1,1,,A,339SQR00?w<tSF0l4Q@>40=v0QoC,0*1F
!AIVDM,1,1,,A,H39FWV0lDi@DlT0000000000000,0*5E
!AIVDM,1,1,,A,33uqt60Oi0Pif>lNoffhc@c<00qi,0*66


another big problem for me is. there is no calculating off the COG?

i am so hopefully that you can help me!
Reply


Messages In This Thread
RE: need to restart NMEA0183 Multiplexer to start GPS Position / Calibrating Compass - by first317 - 2016-06-27, 09:14 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)