2018-09-15, 05:15 PM
You have connect your NASA ais to a NMEA0183(RS422) to usb converter.
On the Serial page click on the ttyUSBx device.
Give it a name (ais for example)
select assignment kplex
set bauds 38400
click apply
On the kplex page select the name you entered before (ais)
click diagnostic (now you should see data)
Provided that the AIS receives data (blinking diode) and the NMEA0183 wiring is correct
On the Serial page click on the ttyUSBx device.
Give it a name (ais for example)
select assignment kplex
set bauds 38400
click apply
On the kplex page select the name you entered before (ais)
click diagnostic (now you should see data)
Provided that the AIS receives data (blinking diode) and the NMEA0183 wiring is correct