2018-09-20, 08:07 AM
I'm just working out my setup. I use Sean's recommended setup Arduino Nano (Arduino UNO is not a 100% fit) in combination with a 15A ESC Brushed DC Motor Speed Controller by Hobby Components Ltd, I use the default setup from PP (if not familiar with C, it's a bit complicated to change). I use it to drive a Vetus electric hydraulic pump, this is a brushed motor. In my lab i have it working. Next step is waiting for the Moitessier HAT for the Raspberry PI, which will be available end of October (regarding to Rooco). In the mean time i'm installing my hydraulic system in my boat (9 meter motor boat). I made some schemes etc, see my last contribution in the post regarding IO pins Raspberry (this is where i started, since then moved to additional Arduino).