PyPilot doesn't work after upgrade

[xfactor99]

If you need to fix this bug and you can not wait for an openplotter update, do this:

Code:

cd
mkdir delete
cd delete
git clone https://github.com/pypilot/pypilot
git clone https://github.com/pypilot/pypilot_data
cp -rv pypilot_data/* pypilot
cd pypilot
python setup.py build
sudo python setup.py install
cd
sudo rm -rf delete

I have a test setting with Openplotter 1.2.0 Alpha were pypilot with the IMU MPU-9250, an arduino with motordriver as well a an Rudder-feedback is working fine.


After doing the above "Bugfix" I got a nice new calibation window, aswell I coud call the pypilot-control from the openplotter -pypilot-window (not the opencpn).

The problem is that now the IMU MPU-9250 is not working, it is recognized, but dead, no data are shown in the calibation windows .....

So I endet up going back to the pypilot as it comes with openplotter 1.2.0 Alpha. 

Also here are the isues with the calibration.

Maybe some can give me an hint how to solve it, otherwise I´ll wait for an Openplotter update, it is not urgend.

Save sailing to all

Andreas