PyPilot doesn't work after upgrade

[ddelorme]

I have noticed some SK weirdness. In the instrument panel I get navigation.attitude as

no_source{"pitch":0.001483529905,"roll":0.006667157926,"yaw":0}

My settings are as followed.

Forced openplotter to do a full update.
Upgraded to current Pypilot as per Sean's directions.
Removed some old config files from .pypilot. ? questionable choice.

Added openplotter/serial device for server.
Servo assignment pypilot

openplotter/kplex
Pypilot TCP both localhost 20220


openplotter/pypilot
basic/auto pilot

This all works.
my settings in OPCN are:
And I noticed that I have no Compass hmmmm 
changed pypilot config
Forward nmea off
Restarted OPCN
Compass is back


debug of my nmea port.

Code:

$OCXDR,A,0.3,D,ROLL*77 //openplotter
$OCXDR,A,0.1,D,PTCH*67 //openplotter
$ARMWV,24.70,R,0.00,N,A*1f
$ARMWV,26.20,R,0.00,N,A*18
$GPGGA,193735.000,4954.3496,N,09707.5222,W,2,7,1.54,230.2,M,-24.6,M,0000,0000*64
$APXDR,A,0.099,D,PTCH*7B //pypilot
$APXDR,A,0.291,D,ROLL*63 //pypilot
$APHDM,280.146,M*3A//pypilot

I have 2 sources for Pitch and roll openplotter does not have heading.. and values are strange...
Removed openplotter generate nmea for pitch and roll..
and changed kplex pypilot to in
one source now) then changed kplex back to both so openplotter Autopilot can see wind and gps?
removed OCPN as source and forward NMEA forward?
Everything seems to work now yup it works but no wind needle at 0 LOL it is working just no wind today and the needle is pointing north.

I hope this helps?