This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
True wind output
#1
Hello

I would like to output true wind speed and direction to SignalK (specifically the delta log files)
I am using the SK 'Log all SignalK data' plugin

This is obviously calculated from the apparent readings- I thought the 'calculate' tool in Openplotter might do this, but it does not seem to make any difference

If anyone can help, I would be very grateful
thank you



Andrew
  Reply
#2
(09-22-2018, 07:15 AM)barney2074 Wrote: Hello

I would like to output true wind speed and direction to SignalK (specifically the delta log files)
I am using the SK 'Log all SignalK data' plugin

This is obviously calculated from the apparent readings- I thought the 'calculate' tool in Openplotter might do this, but it does not seem to make any difference

If anyone can help, I would be very grateful
thank you



Andrew


Use the Derived Data plugin to calculate true wind data. You need to install the plugin and enable it and activate the calculations that you want.


Sent from my iPhone using Tapatalk
  Reply
#3
(09-23-2018, 01:33 AM)tkurki Wrote:
(09-22-2018, 07:15 AM)barney2074 Wrote: Hello

I would like to output true wind speed and direction to SignalK (specifically the delta log files)
I am using the SK 'Log all SignalK data' plugin

This is obviously calculated from the apparent readings- I thought the 'calculate' tool in Openplotter might do this, but it does not seem to make any difference

If anyone can help, I would be very grateful
thank you



Andrew


Use the Derived Data plugin to calculate true wind data. You need to install the plugin and enable it and activate the calculations that you want.


Sent from my iPhone using Tapatalk
thanks for the reply

I will try this when I am back on the boat next weekend

Andrew
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)