Moitessier HAT firmware update failed after update to OpenPlotter 1.2

[MilesAhead]

Yes, I've done all that, and the pressure, heel, yaw, temperature, ... are all working. It is just the GPS/GNSS that is not.

I looked at the "cat /dev/moitessier.tty" output some more and there are clearly several satellites in view.
$GPGSV,3,1,11,07,81,272,,08,71,064,,30,46,306,30,11,40,165,,0*63
$GPGSA,A,1,,,,,,,,,,,,,,,,1*03
$GPGLL,,,,,204350.000,V,N*7A

When I run "cat /dev/moitessier.spi" I see the following:
$GPGSV,3,1,11,07,82,240,,08,67,058,,30,51,304,29,11,45,163,,0*66
$GNGSA,A,2,78,,,,,,,,,,,,44.39,44,38,1.0,2*0C
$GNGLL,4323.3890,N,07942.6931,W,205432.000,A<A*56

So clearly there are some reading coming from what I presume to be the GNSS, but there doesn't seem to be anything from the GPS.