DIY 10" sunlight readable plotter

[BellaX]

Hi all,

the 10" display arrived on monday after one week of customs clearing.

Very sad to say the touch-panel has cracks and the LCD is bended and broken.

I was able to bring up the touch-panel to test an additional acrylic sheet.
It works with acrylic sheets up to 1 mm. I will use a 0.5 mm anti-glaze
acrylic sheet for the plotter.

The good thing is that i know the acrylic sheet will work and the panel can
be optically bonded to the LCD. The bad thing is I have to wait again for
a new setup.

Chris