This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrade to OP 0.8.0 failed
#1
I just tried an upgrade (on my RPI3)  to OP 0.8.0 from 0.7.1 using instructions on openmarine.net.

Failed as below


pi@openplotter:~ $ python /home/pi/.config/openplotter/openplotter.py
Traceback (most recent call last):
  File "/home/pi/.config/openplotter/openplotter.py", line 18, in <module>
    import wx, sys, os, subprocess, webbrowser, re, json, pyudev, time
ImportError: No module named pyudev
pi@openplotter:~ $ 

Any ideas sailoog ?
Reply
#2
Install the extra packages:
http://www.sailoog.com/en/blog/test-open...r-v080beta

Enviat des del meu fnac 5 usant Tapatalk
Reply
#3
(2016-03-26, 04:16 PM)Sailoog Wrote: Install the extra packages:
http://www.sailoog.com/en/blog/test-open...r-v080beta

Enviat des del meu fnac 5 usant Tapatalk
When trying to clone from github, I got the answer : unable to access .../...gnuts_handshake() failed: Error in the pull function.
Of course the previous command worked perfectly : my dir Openplotter is now freshly erased ...
any idea ?
Cordialement
Didier B
Pi4, SSD USB3, OP 3.0 Touch SK 3.2.1 OpenCPN  5.8.4 :  Thank you  Thank you  Thank you


Reply
#4
Try to download the zip file from github manually and save in /home/.config/openplotter/

Enviat des del meu fnac 5 usant Tapatalk
Reply
#5
(2016-03-28, 07:39 AM)symeteora Wrote: Good morning and Happy Easter
I have a problem...

After
python /home/pi/.config/openplotter/openplotter.py

becom two error

- Multiplexer configuration file does not exist. Add inputs and apply change
and when
Traceback (most recent call last):
 File "/home/pi/.config/openplotter/openplotter.py", line 2312, in <module>
   MainFrame().Show()
 File "/home/pi/.config/openplotter/openplotter.py", line 536, in __init__
   self.set_layout_conf()
 File "/home/pi/.config/openplotter/openplotter.py", line 714, in set_layout_conf
   with open(home+'/.config/signalk-server-node/settings/openplotter-settings.json') as data_file:
IOError: [Errno 2] No such file or directory: '/root/.config/signalk-server-node/settings/openplotter-settings.json'

I think you are trying to run openplotter repository over a fresh raspbian image, aren't you?
OP needs several packages and system settings so you should download OpenPlotter v0.7.1beta:
http://sailoog.com/en/blog/test-openplotter-v071beta

and update to 0.8.0beta following the instructions here:
http://sailoog.com/en/blog/test-openplotter-v080beta
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)