This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Missing Tabs
#1
Hi,
I've installed openplotter 1.0.0 on a Raspberry 2 plus and it works so far, but when I compare the openplotter "TABs" in my installation with the sreenshots in the documentation, there are some differences. The following Tabs do not exsist:
USB manager, NMEA0183, Compass

I've used this documentation:
https://sailoog.gitbooks.io/openplotter-...-tabs.html

Any ideas ?

Sven
Reply
#2
Have you tried going through the upgrade process to bring openplotter to the latest version? You might be challenged to use it on an RPI 2+!
Reply
#3
I've upgrade to Version 1.2.0 alpha now but there are no changes in the TABs display.

Sven
Reply
#4
those tabs have changed USB manager is now serial ect. that documentation is old.
incomplete but newest doc.
https://docs.sailoog.com/openplotter-v1-x-x
it should look like this now

[Image: assets%2F-L9g5MoJ9GSCaNGq_yjb%2F-LDwW3aU...68cea205a1]
Reply
#5
Thanks, that are the same Tabs which I have in my installation. Does this mean the compass and NMEA0183 are canceled in the new version ?

Sven
Reply
#6
no its compass =pypilot   NMEA0183 =kplex    n2k =can   usb manager =serial

[Image: assets%2F-L9g5MoJ9GSCaNGq_yjb%2F-LMX8_h7...b0ccf36fdf]
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)