This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NMEA (RMV) output to Serial port?
#1
Hi,

I have a NASA Clipper Tactical Wind system that i finally have gotten to play well with my OpenPlotter gear.

Now, to use the True Wind functionality i need to send RMV (or VHW) to the instrument.
I am running 1.2.0 alpha with a Moitessier Hat and a lot of different paraphernailia (promise, more questions later)

How do i set up the system to send a signal, NMEA RMV, out to the USB/RS232 Serial interface? In earlier versions this was possible but now i can only "Add Network" in the Kplex section

Maybe i could add something in the "Advanced " config manually but i could use some guidance. The input from the NASA wind looks like this:


[serial]
name=wind
direction=in
optional=yes
filename=/dev/ttyOP_wind
baud=4800

Greatly appreciate any help withthis!

/Micael
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)