This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Install openplotter(the software) on a different OS
Hi, Im trying to install open plotter on a different OS im building (raspbian based)
I tried to launch the python script and see where it crash untill I meet all the dependency.

it given me the following install procedure:

### packages ###

sudo apt-get install -yy python-wxtools python-requests python-pyudev python-gammu python-pip python-twython x11vnc sudo whois python-w1thermsensor python-websocket python-dateutil python-nmea2 python-spydev python-smbus;
sudo pip install paho-mqtt geomag ;
sudo apt-get install -yy  hostapd # I think this is optional

### pypilot ###

sudo apt install -yy python-gps python-serial libpython-dev python-numpy python-scipy swig python-opengl python-pip wiringpi
sudo pip install ujson
git clone
cd RTIMULib2/Linux/python
python build
sudo python install
mkdir ~/.pypilot
echo '{"host": "localhost"}' > ~/.pypilot/signalk.conf

### kplex ###


   sudo dpkg -i kplex_1.4-1_armhf.deb

   touch /home/pi/.kplex.conf

### openplotter ###
git clone ;

cd openplotter ;
mkdir -p /home/pi/.config/openplotter ;
cp -r ./*  /home/pi/.config/openplotter/ ;

cd /home/pi/.config/
git clone
cd signalk-server-node
npm install

cd /home/pi/.config/openplotter/ ;
python startup && python openplotter


This done, My problem it that it use his own install of signalk(and other tools). But I already have a global install of it.
Is there a way to ask openplotter to interact with the global install instead of his own.
Or to disable the management of signalk if I prefer to use my own. ?


Forum Jump:

Users browsing this thread: 1 Guest(s)