This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
OpenPlotter v2.x.x is coming!!
#61
I know there is no support for op 2.09 but wonder if there is something I am missing.
Although Moitessier hat seems to work fine I cant see any signalK values and also localhost:3000 does nothing.


Attached Files Image(s)
   
Reply
#62
Hi all,
It may look silly, but how or where do you download the OP 2xx ?? Huh
My Pi 4 is on the way and my Pi 3b is ready to replace OP 1.

Thanks and regards.
Reply
#63
(2019-09-14, 01:17 AM)carlos-palma Wrote: Hi all,
It may look silly, but how or where do you download the OP 2xx ?? Huh
My Pi 4 is on the way and my Pi 3b is ready to replace OP 1.

Thanks and regards.

Hi ! Not yet in production but some hints here for the OP BETA 2.
https://pysselilivet.blogspot.com/2019/0...guide.html
________________________________________

Blog; https://pysselilivet.blogspot.com/
Reply
#64
(2019-09-14, 12:57 PM)MatsA Wrote:
(2019-09-14, 01:17 AM)carlos-palma Wrote: Hi all,
It may look silly, but how or where do you download the OP 2xx ?? Huh
My Pi 4 is on the way and my Pi 3b is ready to replace OP 1.

Thanks and regards.

Hi ! Not yet in production but some hints here for the OP BETA 2.
https://pysselilivet.blogspot.com/2019/0...guide.html

Hi MatsA, thanks for the hint, now I can start plying!!
Reply
#65
I have published a openplotter 2 roadmap: http://forum.openmarine.net/showthread.php?tid=1992
Reply
#66
OK!!, I had not seen that, sorry.
I will start looking into it.
Thanks and regards,
Carlos.
Reply
#67
(2019-09-13, 10:11 AM)SkipperEarly Wrote: I know there is no support for op 2.09 but wonder if there is something I am missing.
Although Moitessier hat seems to work fine I cant see any signalK values and also localhost:3000 does nothing.

Hi, a bit out of subject, but saw what i2C unit you were using. But that one is not waterproof? Using it on inside only?
Otherwise, look for this LITTLE fellow: MS5837-02BA06 (i2C adress 76).
Waterproof, Chlorine safe and also very accurate. I have tried some of them, really neat ones. And yes, a bit tricky, but possible to not use SMD technic, just solder some wires to them directly.


/Leif
Reply
#68
(2019-09-17, 09:22 AM)leif_klasson@hotmail.com Wrote: Otherwise, look for this LITTLE fellow: MS5837-02BA06 (i2C adress 76).
Do you have a link for that part?
Reply
#69
Please help me!
How to install NMEA0183 serial devices to OP v2 ?
I can't to do it.
Documentation for this version of OP has clear pages and I can't to find any information about it.
Please help me.
Thanks.
Reply
#70
   

Hi Sapers,

serial input can be done in SignalK. See my screenprint. Baudrate and/or post address can be different. Ans remember to restart SignalK after changes has been made.

Bram
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)