This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CAN-USB Stick v2 not working
#4
(04-27-2019, 09:46 PM)dave.ritten@gmail.com Wrote: Hi Jim
Thanks for your help! I also have a Microsoft USB keyboard/mouse attached. This is what I get:-
pi@Daves-PI:~ $ lsusb
Bus 001 Device 004: ID 045e:07b2 Microsoft Corp.
Bus 001 Device 007: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x UART Bridge / myAVR mySmartUSB light
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Rgds Dave

Ok I reset the CAN-USB stick in the TX PGN menu and it now seems to working ok. Thanks for your help.
  Reply


Messages In This Thread
RE: CAN-USB Stick v2 not working - by jim321 - 04-27-2019, 04:31 PM
RE: CAN-USB Stick v2 not working - by dave.ritten@gmail.com - 04-28-2019, 12:30 AM

Forum Jump:


Users browsing this thread: 1 Guest(s)