This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
no ais with gps in opencpn
#1
Hi, in opencpn, I can't always have my position and ais signal...
Gps works quite always but it don't when AIS work and viceversa
When ais work I have gps data in inspector but not in opencpn
I Made test also with a gps usb antenna, it seems more stable but same problem
My configuration is:

Rpi3
Gps BT antenna emtac
Daisy AIS reciver

Openplotter 8.0

If I open openplotter in Debug mode, the terminal say 'DEVLINKS'

I did this 
http://forum.openmarine.net/printthread.php?tid=79 
to install the BT antenna 

To install daisy I add a serial in openplotter NMEA 0183 tab in /Dev/ttyACM0 at 38400 baud

Thanks a lot
Reply
#2
Please try creating "Alias" for GPS and AIS in "USB manager" tab, then use these alias for setting the serial inputs in NMEA 0183 tab.
Reply
#3
(2016-08-19, 11:17 AM)Sailoog Wrote: Please try creating "Alias" for GPS and AIS in "USB manager" tab, then use these alias for setting the serial inputs in NMEA 0183 tab.

in "USB manager" tab I can only find "daisy" and not the gps BT antenna.

Now it is working but sometimes it lost the gps signal

Another screenshot

More screenshot

And more

Last screenshot

It is completely unstable... Now it is not working


Attached Files Image(s)
                   
Reply
#4
Same procedure on OP 10?


Inviato dal mio iPhone utilizzando Tapatalk
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)