2019-07-12, 10:48 PM
(This post was last modified: 2019-07-13, 10:28 AM by travis_farmer.
Edit Reason: Solved
)
i am currently flashing a second SD card to see if a fresh install fixes the issue, but while i wait for that, here is what i want to do.
Wlan0 (Rpi3+ built-in): AP for MQTT/Signal K devices, and such.
Wlan1 (dongle): use for home WiFi debug, and to provide internet.
my system was previously working, without the dongle, but i either had to have AP or local network connection. not both. so i bought the dongle, plugged it into my Rpi, booted as i have always done, and even though it shows up on the local WiFi lan, i can't connect to it via VNC, nor can the Rpi ping my local server, yet it has an internet connection (strange). i have tried so many different Lan configurations on the OpenPlotter utility, that i have forgotten what worked (hence flashing a second SD card), though i am saving the original, just in case.
i am using Openplotter 1.0.0 image (never got the update to work with just the one interface).
i suspect the WiFi dongle is not compatible with acting as an AP, yet the local WiFi keeps attaching to the Rpi on-board WiFi. the dongle is a RTL8188CU chipset. but otherwise generic.
thoughts? recommendations?
~Travis
(SOLVED 07-13-2019 05:11EST)
i managed to get the update to complete, so i am now running 1.2.0 (i think), and it all seems to be working correctly.
Wlan0 (Rpi3+ built-in): AP for MQTT/Signal K devices, and such.
Wlan1 (dongle): use for home WiFi debug, and to provide internet.
my system was previously working, without the dongle, but i either had to have AP or local network connection. not both. so i bought the dongle, plugged it into my Rpi, booted as i have always done, and even though it shows up on the local WiFi lan, i can't connect to it via VNC, nor can the Rpi ping my local server, yet it has an internet connection (strange). i have tried so many different Lan configurations on the OpenPlotter utility, that i have forgotten what worked (hence flashing a second SD card), though i am saving the original, just in case.
i am using Openplotter 1.0.0 image (never got the update to work with just the one interface).
i suspect the WiFi dongle is not compatible with acting as an AP, yet the local WiFi keeps attaching to the Rpi on-board WiFi. the dongle is a RTL8188CU chipset. but otherwise generic.
thoughts? recommendations?
~Travis
(SOLVED 07-13-2019 05:11EST)
i managed to get the update to complete, so i am now running 1.2.0 (i think), and it all seems to be working correctly.
1973 Cruisers, Inc. Marlin 23
OMC outdrive, GM 5.7L V8
OMC outdrive, GM 5.7L V8