2019-09-23, 04:34 PM
(2019-09-20, 05:26 PM)glowntiger Wrote: Hi Sailoog,
I´m not sure if this is the right thread for questions to the Template?
I started a little bit to write a app for Openplotter and the MCS Modul. This Python work with wx is already new for me.
Here you find my first tests... :
https://github.com/Thomas-GeDaD/openplotter-MCS
Some questions:
When started the postinstall.py ? Also the work with setuptools is new for me... ;-) So i do not know How this start? Or did this start later through OP-settings?
I want to do the configurations ( set the sc16is752 and mcp2515 to config.txt, config the 1-wire driver) on installing the app.
Then I want to add a tab for "Settings" and for "1-wire" configuration.
On Settings i only want to display if all config is correct and the serial/can ports availible.
On 1-wire tab i want to make the config for the 1-wire sensors like in your I2C App....
The inputs can define in your part?
The startup.py starts at every systemstart or at programmstart?
- when you install any app from openplotter-settings, postinstall.py file is executed after the app package installation. If you are developing, you have to install your app for testing using "sudo python3 setup.py install" and then you have to run manually the postinstall script just typing "myappPostInstall"
- startup.py files have 2 functions: "start" and "check". On system start all startup.py files of all apps are called and "start" functions are executed, then "check" functions are executed. When you click on "check system" in openplotter-settings all startups.py files of all apps are called too but only "check" functions are executed.
- I do not understand this question: "The inputs can define in your part?"