(2019-11-20, 08:03 PM)tkurki Wrote: Different Raspbians? See https://github.com/SignalK/signalk-serve...issues/857
Where is the path referenced? Like why did you try a wrong path and is there something to update someplace?
Sent from my iPhone using Tapatalk
Thanks for quick response @tkurki
So the conlusion must be that if You want to use the sample files, which I think really is a good way to test the application, NMEA0183 samplefile "plaka.log" and NMEA2000 sample file "aava-n2k.data”, You must localize them with for example, sudo find -name "plaka.log", at the root ?
Are there some solution to make it more simple ?
Shall I do a PR in the https://github.com/SignalK/signalk-serve...mple-files and update. The paths are wrong ? They worked in a former SK version.
(2019-11-20, 08:42 PM)BeMarek Wrote: Hi guys. I am completely new to OP and I am trying to learn version 2.x. I'd like to start with very basic thing, just add my usb gps holux receiver to transfer the position e.g. to OpenCPN. How to do this? In OP 2.x there is nothing similar like OP app with the tabs for all the settings as it is described in the documentation of OP 1.x
Since the application "Serial Devices Management" isn't ready, in OP Beta V2, You have to connect serial USB devices in SK. (After the SK install !)
In OC setup the connection from SK to OC
[*]Click the Options-icon
[*]Connections-tab
[*]Add Connection
[*]Network
[*]Protocol: TCP
[*]Address: "localhost"
[*]DataPort: 10110
[*]Check “Show NMEA Debug Window” to see incoming messages.