2019-10-17, 02:54 PM
If pypilot is in imu only mode, it won't produce nmea messages. In full autopilot mode (you could just never engage it) you will get tcp nmea messages on port 20220 which opencpn can read and use in the dashboard.
(OP2) IMU data from pypilot not being received by SK or OpenCPN
|
« Next Oldest | Next Newest »
|
Messages In This Thread |
(OP2) IMU data from pypilot not being received by SK or OpenCPN - by rastam4n - 2019-09-30, 05:55 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by Johnnysails - 2019-09-30, 06:10 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by rastam4n - 2019-09-30, 06:27 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by rastam4n - 2019-10-15, 05:05 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by seandepagnier - 2019-10-17, 02:54 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by rastam4n - 2019-10-17, 03:05 PM
RE: (OP2) IMU data from pypilot not being received by SK or OpenCPN - by Luckbert - 2019-10-17, 06:50 PM
|