So... Three weeks of the terrible, lethal man-flu but I've managed to get some work done. So this is how it is suppose to work. I can now control the Shelly's from three push buttons on my display panel, and as they are momentary switches, they can also be used to dim each Shelly. The drawback is that it controls all four channels on each RGBW2, which is why I want to make a Node red interface.
THAT on the other hand turns out to be more challenging than expected, as i do not want to clutter wit a On and an OFF button. Furthermore I will have a slider for dimming for each channel. This of course will have to be in sync with the button so the button/slider knows whether the light is on or not. Challenging indeed. Anyone done this and can share a flow?
Got the hang of MQTT and change nodes now - so getting somewhere - s l o w l y... ;-)
THAT on the other hand turns out to be more challenging than expected, as i do not want to clutter wit a On and an OFF button. Furthermore I will have a slider for dimming for each channel. This of course will have to be in sync with the button so the button/slider knows whether the light is on or not. Challenging indeed. Anyone done this and can share a flow?
Got the hang of MQTT and change nodes now - so getting somewhere - s l o w l y... ;-)