This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Anyone using an Airmar p319 depth sensor?
#1
Hello,
the boat i took over was equipped with an Airmar p319.
Does anyone here have experience with this device?
I would like to connect it to my OpenPlotter installation. 

Thanka a lot.
Reply
#2
(2020-01-05, 01:55 AM)SailorMacSailface Wrote: Hello,
the boat i took over was equipped with an Airmar p319.
Does anyone here have experience with this device?
I would like to connect it to my OpenPlotter installation. 

Thanka a lot.

I do not think you can  connect  a Airmar p319  direct to  openplotter  because  it is a  analog sensor  .   
You need a  Instrument  / adapter  to process the analog data  to digital  NMEA0183  Or NEMA2K  

I self are using a  Airmar dst800  which is  a NMEA0183  sensor .
Sailing in a LM23  23" motor sailor i Danmark  .  Mostly In Koege bay  .
Harbored  in SF-Syd  , Copenhagen .
Marine Enginer  ,   Pt. working on power plant 
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)