2020-01-25, 09:11 PM
Fresh 2020-01-13-OpenPlotter-Starting-v2.0.img installed and updated with pypilot 2.0.5-beta, the boat graphic is working!
Running thru the accel calibration process. ( thx @mgrouch I've been looking at the 1.x docs )
1) after the 6 side calibration and the set of green dots, they never turn yellow
2) adding more point to sphere does not seem to help it
2) the calibration age never updates
3) there are time when pypilot_calibrate process runs at 99-100% and the graphic stops updating
Calibration is not locked and the Clear button seems to have no effect
IMU wire is about 30cm
stopped pypilot processes, removed .pypilot/pypilot.conf and restarted no change in calibration age
rebooted and the calibration age remains the same
( maybe I should take this discussion to another thread? )
Running thru the accel calibration process. ( thx @mgrouch I've been looking at the 1.x docs )
1) after the 6 side calibration and the set of green dots, they never turn yellow
2) adding more point to sphere does not seem to help it
2) the calibration age never updates
3) there are time when pypilot_calibrate process runs at 99-100% and the graphic stops updating
Calibration is not locked and the Clear button seems to have no effect
IMU wire is about 30cm
stopped pypilot processes, removed .pypilot/pypilot.conf and restarted no change in calibration age
rebooted and the calibration age remains the same
( maybe I should take this discussion to another thread? )