2020-01-21, 10:04 PM
Today I received a Garmin NMEA2000 GPS.
Connected this to my NMEA2000 network setup with the Canable canbus board.
Used the canbus settings in OpenPlotter 2.0 with SignalK server 1.20. Did not work.
After sending the activation string for the Candlelight firmware of the Canable, the NMEA2000 conversion to SignalK worked.
And now with the OpenCPN version with direct input of SignalK it works great.
Regards,
Bram
Connected this to my NMEA2000 network setup with the Canable canbus board.
Used the canbus settings in OpenPlotter 2.0 with SignalK server 1.20. Did not work.
After sending the activation string for the Candlelight firmware of the Canable, the NMEA2000 conversion to SignalK worked.
And now with the OpenCPN version with direct input of SignalK it works great.
Regards,
Bram