2017-01-12, 12:04 AM
Thanks for the reply.
Please see my answers - findings - statements below next to yours
1. and 3. Have you read
https://sailoog.gitbooks.io/openplotter-...fi-ap.html
Sailsunfurled - Yes, thanks.
What have you configured in WiFi AP? Sailsunfurled - I am running static IP on the LAN. When I set the LAN IP it gets over-written and changed to DHCP with a re-boot. Something with 0.9 re-configures /etc/network/interfaces afterI set them to static. No WiFi-AP within the Pi and OpenPlotter with my setup.
2. The stream from kplex to signalk can't be deleted (page NMEA 0183 third line signalk) Sailsunfurled - Thanks
3. The stream from kplex to opencpn can't be deleted (page NMEA 0183 second line opencpn) Becareful this was 10110 and has changed to 10109! SignalK already used the port 10110. All devices which connected to openplotter/kplex in 0.8 have to change this! Sailsunfurled - Thanks, figured it out.
4. Where did you seek for the temperature? Openplotter doesn't produce any NMEA 0183 automatically (XDR formats aren't normed there is much confusion).
The sensors are sending to SignalK and should be in the SignalK diagnostic page. Have a look at
https://sailoog.gitbooks.io/openplotter-...gnalk.html
If you want to have a NMEA 0183 sentence for some SignalK data you can use the NMEA 0183 generator. Sailsunfurled - Thanks
5. It seems that you only have told the hardware not to block PGNs. This is only the first step.
You have to select NMEA 2000 generator (https://sailoog.gitbooks.io/openplotter-...ea-2k.html) Sailsunfurled -Thanks, figured it out.
6. You are right Openplotter uses a different VNC prog. You can select it on Startup page. Sailsunfurled - Yep, got it working with the my old method
7. Do you mean i2c temperature? Have you select a SignalK name on I2C sensor page? Sailsunfurled - Yep got it working.
The documentation has been updated at some places. Most users don't know that. Sailsunfurled - Yep, see that.
Sailsunfurled - Node-Red crashes. I've got a pretty good Node-Red page built for my needs. I see where others seem to have the Node-Red crash as well. Node-Red is the bomb. While it works, I can remotely see everything!
Please see my answers - findings - statements below next to yours
1. and 3. Have you read
https://sailoog.gitbooks.io/openplotter-...fi-ap.html
Sailsunfurled - Yes, thanks.
What have you configured in WiFi AP? Sailsunfurled - I am running static IP on the LAN. When I set the LAN IP it gets over-written and changed to DHCP with a re-boot. Something with 0.9 re-configures /etc/network/interfaces afterI set them to static. No WiFi-AP within the Pi and OpenPlotter with my setup.
2. The stream from kplex to signalk can't be deleted (page NMEA 0183 third line signalk) Sailsunfurled - Thanks
3. The stream from kplex to opencpn can't be deleted (page NMEA 0183 second line opencpn) Becareful this was 10110 and has changed to 10109! SignalK already used the port 10110. All devices which connected to openplotter/kplex in 0.8 have to change this! Sailsunfurled - Thanks, figured it out.
4. Where did you seek for the temperature? Openplotter doesn't produce any NMEA 0183 automatically (XDR formats aren't normed there is much confusion).
The sensors are sending to SignalK and should be in the SignalK diagnostic page. Have a look at
https://sailoog.gitbooks.io/openplotter-...gnalk.html
If you want to have a NMEA 0183 sentence for some SignalK data you can use the NMEA 0183 generator. Sailsunfurled - Thanks
5. It seems that you only have told the hardware not to block PGNs. This is only the first step.
You have to select NMEA 2000 generator (https://sailoog.gitbooks.io/openplotter-...ea-2k.html) Sailsunfurled -Thanks, figured it out.
6. You are right Openplotter uses a different VNC prog. You can select it on Startup page. Sailsunfurled - Yep, got it working with the my old method
7. Do you mean i2c temperature? Have you select a SignalK name on I2C sensor page? Sailsunfurled - Yep got it working.
The documentation has been updated at some places. Most users don't know that. Sailsunfurled - Yep, see that.
Sailsunfurled - Node-Red crashes. I've got a pretty good Node-Red page built for my needs. I see where others seem to have the Node-Red crash as well. Node-Red is the bomb. While it works, I can remotely see everything!