Problems with VNC und display driver

[Luckbert]

I am new in the Raspberry matter and come somehow not further in my driver problem.
I have installed this driver (see attachment).
There must be a possibility the display (see link)

http://www.waveshare.com/wiki/10.1inch_HDMI_LCD

With touch function and Openplotter.

edit:
Problems I noticed:

No Autostarts
Other bootcreen
No splashscreen
No VNC

[Luckbert]

Hello everybody,
Is there a way to install Openplotter in an existing Raspbian?
Greetings Jürgen

[e-sailing]

On the waveshare webside it is said, that no display driver is needed. Only a touchscreen driver has to be installed.
The latest commit on github should automatically recognize a 1024x600 display (The activation would be at the second boot).
Something is wrong with your installation. Try a fresh installation of noobs v0.9.0
rename openplotter folder to openplotter_1
cd ~/.config
git clone -b v0.9.0 https://github.com/sailoog/openplotter.git
sudo reboot

Please use a mouse in the beginning and don't install the touchdriver.
If all things work.
You can install the touchdriver does the problems start again?

There are some guys very active with Touchscreen Openplotter: http://www.neptun22.de/forum/viewtopic.p...9&start=50

[Luckbert]

Hi e-sailing,
Sorry that I am only now. My family was sick and I had to take care of it.
You're right, it's the touchdriver that makes the problems. I will still change the heading.
I have followed your instructions. Before I installed the Touchdriver, everything ran smoothly / error-free. After installing the touchdriver, the system is defective. It does not start anymore. I have always tried all attempts at a new / fresh system.
OP 0.8 runs with the Touchdriver with mentioned problems.
OP 0.9 does not run at all. It depends on the boot process.

So slowly annoys me this touchdriver. Unfortunately, it is an open boat and I have no options to use a mouse / trackball.

Do you have the option / time to install the Touchdriver or test?

greetings

[Luckbert]

Hello everybody,
I have another problem after the instalation of the touchdriver. The inspector reports the following problem.
Failed to connect with localhost: 10110. Error: 111 trying to reconnect.

All these errors are caused by the driver.
Please help me with this matter.
Greetings Jürgen