This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Can I use the IMU sensor GY-511 with LSM303DLHC with Openplotter?
#1
HI
I have the IMU sensor GY-511 with LSM303DLHC, I tried to connect it, and is seen by i2cdetect but is not recognized at all by Openplotter, can I configure the software to use this?
Reply
#2
No. You need minimum a 9 dof. Have a look into the readme of the library
https://github.com/sailoog/RTIMULib2/blo.../README.md.
If you add a L3GD20H it should work.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)