This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
SDR AIS available in OpenPlotter 2
#91
Hi! I have set up my RTL-SDR VHF according to the instructions, but I do not see any data coming through into SignalK. I am not at the boat and perhaps there are no AIS ships in range, but can I verify that my setup is correct? Should I see some data still?
Reply
#92
Hi.
I'm using SDR VHF 2.1.1 and the newest openplotter available for download. I'm trying to calibrate my AIS, have followed the guide, but when I try to calibrate the device, it start to do it's thing, but when I press ctrl+c, the terminal window closes so fast, I cant read the result.
When I try to execute "rtl_test" in a new terminal window, it stops at:

//
Found 1 device(s):
0: Realtek, RTL2838UHIDIR, SN: AIS

Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Supported gain values (29): 0.0 0.9 1.4 2.7 3.7 7.7 8.7 12.5 14.4 15.7 16.6 19.7 20.7 22.9 25.4 28.0 29.7 32.8 33.8 36.4 37.2 38.6 40.2 42.1 43.4 43.9 44.5 48.0 49.6
[R82XX] PLL not locked!
Sampling at 2048000 S/s.

Info: This tool will continuously read from the device, and report if
samples get lost. If you observe no further output, everything is fine.

Reading samples in async mode...
Allocating 15 zero-copy buffers
lost at least 8 bytes
//

Anyone know what I'm doing wrong?
Reply
#93
Hi -

Trying to install SRD VHF while running Settings 3.4.4. The app shows up in the OpenPlotter Apps menu, but even after Refresh, Installed is blank, and so are Candidate and Pending Tasks. And of course, the Install button is not active. Is the app available for this version/release of Settings?

Suggestions?

Thanks!
Reply
#94
(2022-10-01, 03:02 PM)jmbwind Wrote: Hi -

Trying to install SRD VHF while running Settings 3.4.4. The app shows up in the OpenPlotter Apps menu, but even after Refresh, Installed is blank, and so are Candidate and Pending Tasks. And of course, the Install button is not active. Is the app available for this version/release of Settings?

Suggestions?

Thanks!

Not yet. Roadmap: https://forum.openmarine.net/showthread.php?tid=3878
Reply


Forum Jump:


Users browsing this thread: 3 Guest(s)