2020-06-05, 02:34 PM
Hello All.
Hope this is the right spot to post this.
I am new to the Raspberry, so please bare with me.
Hardware, a Raspberry pi 4, with the original MOITESSIER Hat
Software, a fresh NOOBS install per the instructions, on a new 32 gig ssd card
Issue, heres the trouble, im have tried to hook the pi up to 2 different (but older) HDMI capable monitors, with 2 different cables. but no signal (i assume, as the monitors keep saying no signal), the Pi shows the correct lights flash during boot-up and the Hat lights are on as well, there is a door chime noise, after the pi boots up i assume, which is some sort of system check or error msg (Probably? )
i have seen this can be a problem for others, but can find no real fix, that has worked for me.
Is there anyone who might be so kind as to help walk a noob through some of this?
let me know if you need more info from me, which i assume you will
Thank you all.
Cyric
Hope this is the right spot to post this.
I am new to the Raspberry, so please bare with me.
Hardware, a Raspberry pi 4, with the original MOITESSIER Hat
Software, a fresh NOOBS install per the instructions, on a new 32 gig ssd card
Issue, heres the trouble, im have tried to hook the pi up to 2 different (but older) HDMI capable monitors, with 2 different cables. but no signal (i assume, as the monitors keep saying no signal), the Pi shows the correct lights flash during boot-up and the Hat lights are on as well, there is a door chime noise, after the pi boots up i assume, which is some sort of system check or error msg (Probably? )
i have seen this can be a problem for others, but can find no real fix, that has worked for me.
Is there anyone who might be so kind as to help walk a noob through some of this?
let me know if you need more info from me, which i assume you will
Thank you all.
Cyric