I've tested with the following commands:
Code:
pi@openplotter:/etc/systemd/system $ sudo systemctl status pypilot_client
Unit pypilot_client.service could not be found.
pi@openplotter:/etc/systemd/system $ sudo systemctl status pypilot
● pypilot.service - pypilot
Loaded: loaded (/etc/systemd/system/pypilot.service; enabled; vendor preset:
Active: active (running) since Wed 2021-02-03 20:45:25 CET; 13h ago
Main PID: 4688 (pypilot)
Tasks: 6 (limit: 2063)
CGroup: /system.slice/pypilot.service
├─4688 /usr/bin/python3 /usr/local/bin/pypilot
├─4689 /usr/bin/python3 /usr/local/bin/pypilot
├─4690 /usr/bin/python3 /usr/local/bin/pypilot
├─4692 /usr/bin/python3 /usr/local/bin/pypilot
├─4696 /usr/bin/python3 /usr/local/bin/pypilot
└─4698 /usr/bin/python3 /usr/local/bin/pypilot
Warning: Journal has been rotated since unit was started. Log output is incomple
pi@openplotter:/etc/systemd/system $ sudo systemctl status pypilot_web
● pypilot_web.service - pypilot_web
Loaded: loaded (/etc/systemd/system/pypilot_web.service; enabled; vendor pres
Active: active (running) since Wed 2021-02-03 14:41:10 CET; 19h ago
Main PID: 11135 (pypilot_web)
Tasks: 2 (limit: 2063)
CGroup: /system.slice/pypilot_web.service
└─11135 /usr/bin/python3 /usr/local/bin/pypilot_web 8080
Warning: Journal has been rotated since unit was started. Log output is incomple
pi@openplotter:/etc/systemd/system $ sudo systemctl status pypilot_boatimu
● pypilot_boatimu.service - pypilot_boatimu
Loaded: loaded (/etc/systemd/system/pypilot_boatimu.service; disabled; vendor
Active: inactive (dead)
lines 1-3/3 (END)
I suppose the pypilot_client is located somewhere else, because systemctl couldn't find it and I din't see it in the etc/systemd/system folder
Found a separate script here:
Code:
pi@openplotter:~/pypilot/pypilot $ python client.py
('WARNING: python ujson library failed, parsing will consume more cpu', ImportError('No module named ujson',))
('falling back to python nonblocking socket, will consume more cpu', ImportError('No module named pypilot.linebuffer',))
pypilot failed to import required modules. Did you forget to run sudo python3 setup.py install?
pypilot requires python version 3. python version is 2.7.16 (default, Oct 10 2019, 22:02:15)
[GCC 8.3.0]
Then tried:
Code:
pi@openplotter:~/pypilot/pypilot $ python3 client.py
failed to connect to False
So then I went on to check the dependencies that I see in the Github Pypilot readme:
server dependencies (required): RTIMULIB2 python-gps python-serial libpython-dev python-numpy
python-scipy swig
(recommended):
ujson pyudev
The ones I underlined where not installed, and when trying RTIMULIB2 I got an error saying:
Code:
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Collecting RTIMULIB2
Could not install packages due to an EnvironmentError: 404 Client Error: Not Found for url: https://pypi.org/simple/rtimulib2/
I think may be the module is installed before however, and after installation of the missing dependencies I tried again:
Code:
pi@openplotter:~/pypilot/pypilot $ python client.py
('falling back to python nonblocking socket, will consume more cpu', ImportError('No module named pypilot.linebuffer',))
pypilot failed to import required modules. Did you forget to run sudo python3 setup.py install?
pypilot requires python version 3. python version is 2.7.16 (default, Oct 10 2019, 22:02:15)
[GCC 8.3.0]
So, I think there is something wrong with the installation although it is an out-of-the-box openplotter app.
I went on to continue with the Github installation and try if it would solve the error.
This gave a few invalid syntax errors, but not sure if they are critical:
Code:
pi@openplotter:~/pypilot $ sudo python3 setup.py install
running install
running bdist_egg
running egg_info
creating pypilot.egg-info
writing pypilot.egg-info/PKG-INFO
writing dependency_links to pypilot.egg-info/dependency_links.txt
writing entry points to pypilot.egg-info/entry_points.txt
writing top-level names to pypilot.egg-info/top_level.txt
writing manifest file 'pypilot.egg-info/SOURCES.txt'
reading manifest file 'pypilot.egg-info/SOURCES.txt'
writing manifest file 'pypilot.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_py
copying pypilot/arduino_servo/arduino_servo.py -> build/lib.linux-armv7l-3.7/pypilot/arduino_servo
copying pypilot/linebuffer/linebuffer.py -> build/lib.linux-armv7l-3.7/pypilot/linebuffer
copying hat/ugfx/ugfx.py -> build/lib.linux-armv7l-3.7/pypilot/hat/ugfx
running build_ext
creating build/bdist.linux-armv7l
creating build/bdist.linux-armv7l/egg
creating build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/signalk.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/nonblockingpipe.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/quaternion.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/nmea.py -> build/bdist.linux-armv7l/egg/pypilot
creating build/bdist.linux-armv7l/egg/pypilot/arduino_servo
copying build/lib.linux-armv7l-3.7/pypilot/arduino_servo/arduino_servo_python.py -> build/bdist.linux-armv7l/egg/pypilot/arduino_servo
copying build/lib.linux-armv7l-3.7/pypilot/arduino_servo/_arduino_servo.cpython-37m-arm-linux-gnueabihf.so -> build/bdist.linux-armv7l/egg/pypilot/arduino_servo
copying build/lib.linux-armv7l-3.7/pypilot/arduino_servo/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/arduino_servo
copying build/lib.linux-armv7l-3.7/pypilot/arduino_servo/arduino_servo.py -> build/bdist.linux-armv7l/egg/pypilot/arduino_servo
copying build/lib.linux-armv7l-3.7/pypilot/pyjson.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/vector.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/sensors.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/__init__.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/servo_calibration.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/calibration_fit.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/failedimports.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/client.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/boatimu.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/values.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/server.py -> build/bdist.linux-armv7l/egg/pypilot
creating build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/learning.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/basic.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/absolute.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/intellect.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/pilot.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/simple.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/pilots/wind.py -> build/bdist.linux-armv7l/egg/pypilot/pilots
copying build/lib.linux-armv7l-3.7/pypilot/autogain.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/bufferedsocket.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/serialprobe.py -> build/bdist.linux-armv7l/egg/pypilot
creating build/bdist.linux-armv7l/egg/pypilot/linebuffer
copying build/lib.linux-armv7l-3.7/pypilot/linebuffer/_linebuffer.cpython-37m-arm-linux-gnueabihf.so -> build/bdist.linux-armv7l/egg/pypilot/linebuffer
copying build/lib.linux-armv7l-3.7/pypilot/linebuffer/linebuffer.py -> build/bdist.linux-armv7l/egg/pypilot/linebuffer
copying build/lib.linux-armv7l-3.7/pypilot/linebuffer/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/linebuffer
copying build/lib.linux-armv7l-3.7/pypilot/autopilot.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/gpsd.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/tacking.py -> build/bdist.linux-armv7l/egg/pypilot
creating build/bdist.linux-armv7l/egg/pypilot/hat
creating build/bdist.linux-armv7l/egg/pypilot/hat/templates
copying build/lib.linux-armv7l-3.7/pypilot/hat/templates/index.html -> build/bdist.linux-armv7l/egg/pypilot/hat/templates
copying build/lib.linux-armv7l-3.7/pypilot/hat/gpio.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/config.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/arduino.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/wifi_esp32.py -> build/bdist.linux-armv7l/egg/pypilot/hat
creating build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/static/hat_config.js -> build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/static/jquery.min.js -> build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/static/w3.css -> build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/static/socket.io.min.js -> build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/static/index.css -> build/bdist.linux-armv7l/egg/pypilot/hat/static
copying build/lib.linux-armv7l-3.7/pypilot/hat/lcd_esp32.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/lircd.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/glut.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/upy_client.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/font.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/web.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/font.ttf -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/lcd.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/gpio_esp32.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/testlirc.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/menu.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/hat.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/page.py -> build/bdist.linux-armv7l/egg/pypilot/hat
creating build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/ugfx/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/ugfx/ugfx.py -> build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/ugfx/generate_version.py -> build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/ugfx/_ugfx.cpython-37m-arm-linux-gnueabihf.so -> build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/ugfx/ugfx_mkfont.py -> build/bdist.linux-armv7l/egg/pypilot/hat/ugfx
copying build/lib.linux-armv7l-3.7/pypilot/hat/test.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/boot.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/config_esp32.py -> build/bdist.linux-armv7l/egg/pypilot/hat
copying build/lib.linux-armv7l-3.7/pypilot/hat/testrf.py -> build/bdist.linux-armv7l/egg/pypilot/hat
creating build/bdist.linux-armv7l/egg/pypilot/web
copying build/lib.linux-armv7l-3.7/pypilot/web/tinypilot.py -> build/bdist.linux-armv7l/egg/pypilot/web
creating build/bdist.linux-armv7l/egg/pypilot/web/templates
copying build/lib.linux-armv7l-3.7/pypilot/web/templates/index.html -> build/bdist.linux-armv7l/egg/pypilot/web/templates
copying build/lib.linux-armv7l-3.7/pypilot/web/templates/wifi.html -> build/bdist.linux-armv7l/egg/pypilot/web/templates
copying build/lib.linux-armv7l-3.7/pypilot/web/templates/calibrationplot.html -> build/bdist.linux-armv7l/egg/pypilot/web/templates
creating build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/pypilot_control.js -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/calibration_plot.js -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/jquery.min.js -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/w3.css -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/socket.io.min.js -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/dark_theme.css -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/static/index.css -> build/bdist.linux-armv7l/egg/pypilot/web/static
copying build/lib.linux-armv7l-3.7/pypilot/web/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/web
copying build/lib.linux-armv7l-3.7/pypilot/web/web.py -> build/bdist.linux-armv7l/egg/pypilot/web
copying build/lib.linux-armv7l-3.7/pypilot/version.py -> build/bdist.linux-armv7l/egg/pypilot
creating build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/client_wx.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/Vagabond.obj -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/boatplot.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/autopilot_control_ui.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/__init__.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/calibration_plot.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/scope_wx.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/autopilot_control.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/scope_ui.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/autopilot_calibration.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/Vagabond.mtl -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/scope.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/shape.py -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/ui/compass.png -> build/bdist.linux-armv7l/egg/pypilot/ui
copying build/lib.linux-armv7l-3.7/pypilot/resolv.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/servo.py -> build/bdist.linux-armv7l/egg/pypilot
copying build/lib.linux-armv7l-3.7/pypilot/rudder.py -> build/bdist.linux-armv7l/egg/pypilot
byte-compiling build/bdist.linux-armv7l/egg/pypilot/signalk.py to signalk.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/nonblockingpipe.py to nonblockingpipe.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/quaternion.py to quaternion.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/nmea.py to nmea.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/arduino_servo/arduino_servo_python.py to arduino_servo_python.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/arduino_servo/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/arduino_servo/arduino_servo.py to arduino_servo.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pyjson.py to pyjson.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/vector.py to vector.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/sensors.py to sensors.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/servo_calibration.py to servo_calibration.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/calibration_fit.py to calibration_fit.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/failedimports.py to failedimports.cpython-37.pyc
File "build/bdist.linux-armv7l/egg/pypilot/failedimports.py", line 14
print 'pypilot requires python version 3. python version is', sys.version
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print('pypilot requires python version 3. python version is', sys.version)?
byte-compiling build/bdist.linux-armv7l/egg/pypilot/client.py to client.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/boatimu.py to boatimu.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/values.py to values.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/server.py to server.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/learning.py to learning.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/basic.py to basic.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/absolute.py to absolute.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/intellect.py to intellect.cpython-37.pyc
File "build/bdist.linux-armv7l/egg/pypilot/pilots/intellect.py", line 205
self.accuracy =
^
SyntaxError: invalid syntax
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/pilot.py to pilot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/simple.py to simple.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/pilots/wind.py to wind.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/autogain.py to autogain.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/bufferedsocket.py to bufferedsocket.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/serialprobe.py to serialprobe.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/linebuffer/linebuffer.py to linebuffer.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/linebuffer/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/autopilot.py to autopilot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/gpsd.py to gpsd.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/tacking.py to tacking.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/gpio.py to gpio.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/config.py to config.cpython-37.pyc
File "build/bdist.linux-armv7l/egg/pypilot/hat/config.py", line 1
address = 10.10.10.177
^
SyntaxError: invalid syntax
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/arduino.py to arduino.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/wifi_esp32.py to wifi_esp32.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/lcd_esp32.py to lcd_esp32.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/lircd.py to lircd.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/glut.py to glut.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/upy_client.py to upy_client.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/font.py to font.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/web.py to web.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/lcd.py to lcd.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/gpio_esp32.py to gpio_esp32.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/testlirc.py to testlirc.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/menu.py to menu.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/hat.py to hat.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/page.py to page.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/ugfx/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/ugfx/ugfx.py to ugfx.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/ugfx/generate_version.py to generate_version.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/ugfx/ugfx_mkfont.py to ugfx_mkfont.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/test.py to test.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/boot.py to boot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/config_esp32.py to config_esp32.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/testrf.py to testrf.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/web/tinypilot.py to tinypilot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/web/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/web/web.py to web.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/version.py to version.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/client_wx.py to client_wx.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/boatplot.py to boatplot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/autopilot_control_ui.py to autopilot_control_ui.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/__init__.py to __init__.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/calibration_plot.py to calibration_plot.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/scope_wx.py to scope_wx.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/autopilot_control.py to autopilot_control.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/scope_ui.py to scope_ui.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/autopilot_calibration.py to autopilot_calibration.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/scope.py to scope.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/ui/shape.py to shape.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/resolv.py to resolv.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/servo.py to servo.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/rudder.py to rudder.cpython-37.pyc
creating stub loader for pypilot/arduino_servo/_arduino_servo.cpython-37m-arm-linux-gnueabihf.so
creating stub loader for pypilot/linebuffer/_linebuffer.cpython-37m-arm-linux-gnueabihf.so
creating stub loader for pypilot/hat/ugfx/_ugfx.cpython-37m-arm-linux-gnueabihf.so
byte-compiling build/bdist.linux-armv7l/egg/pypilot/arduino_servo/_arduino_servo.py to _arduino_servo.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/linebuffer/_linebuffer.py to _linebuffer.cpython-37.pyc
byte-compiling build/bdist.linux-armv7l/egg/pypilot/hat/ugfx/_ugfx.py to _ugfx.cpython-37.pyc
creating build/bdist.linux-armv7l/egg/EGG-INFO
copying pypilot.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying pypilot.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying pypilot.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying pypilot.egg-info/entry_points.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying pypilot.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
writing build/bdist.linux-armv7l/egg/EGG-INFO/native_libs.txt
zip_safe flag not set; analyzing archive contents...
pypilot.__pycache__.autopilot.cpython-37: module references __file__
pypilot.__pycache__.boatimu.cpython-37: module references __file__
pypilot.__pycache__.client.cpython-37: module references __file__
pypilot.__pycache__.server.cpython-37: module references __file__
pypilot.arduino_servo.__pycache__._arduino_servo.cpython-37: module references __file__
pypilot.arduino_servo.__pycache__.arduino_servo.cpython-37: module references __file__
pypilot.hat.__pycache__.font.cpython-37: module references __file__
pypilot.hat.__pycache__.hat.cpython-37: module references __file__
pypilot.hat.__pycache__.page.cpython-37: module references __file__
pypilot.hat.__pycache__.web.cpython-37: module references __file__
pypilot.hat.ugfx.__pycache__._ugfx.cpython-37: module references __file__
pypilot.hat.ugfx.__pycache__.ugfx.cpython-37: module references __file__
pypilot.linebuffer.__pycache__._linebuffer.cpython-37: module references __file__
pypilot.linebuffer.__pycache__.linebuffer.cpython-37: module references __file__
pypilot.pilots.__pycache__.__init__.cpython-37: module references __file__
pypilot.ui.__pycache__.autopilot_calibration.cpython-37: module references __file__
pypilot.ui.__pycache__.boatplot.cpython-37: module references __file__
pypilot.ui.__pycache__.client_wx.cpython-37: module references __file__
pypilot.ui.__pycache__.scope_wx.cpython-37: module references __file__
pypilot.web.__pycache__.web.cpython-37: module references __file__
creating dist
creating 'dist/pypilot-0.23-py3.7-linux-armv7l.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing pypilot-0.23-py3.7-linux-armv7l.egg
removing '/usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg' (and everything under it)
creating /usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg
Extracting pypilot-0.23-py3.7-linux-armv7l.egg to /usr/local/lib/python3.7/dist-packages
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg/pypilot/failedimports.py", line 14
print 'pypilot requires python version 3. python version is', sys.version
^
SyntaxError: Missing parentheses in call to 'print'. Did you mean print('pypilot requires python version 3. python version is', sys.version)?
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg/pypilot/hat/config.py", line 1
address = 10.10.10.177
^
SyntaxError: invalid syntax
File "/usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg/pypilot/pilots/intellect.py", line 205
self.accuracy =
^
SyntaxError: invalid syntax
Removing pypilot 0.16 from easy-install.pth file
Adding pypilot 0.23 to easy-install.pth file
Installing pypilot script to /usr/local/bin
Installing pypilot_boatimu script to /usr/local/bin
Installing pypilot_calibration script to /usr/local/bin
Installing pypilot_client script to /usr/local/bin
Installing pypilot_client_wx script to /usr/local/bin
Installing pypilot_control script to /usr/local/bin
Installing pypilot_hat script to /usr/local/bin
Installing pypilot_scope script to /usr/local/bin
Installing pypilot_servo script to /usr/local/bin
Installing pypilot_web script to /usr/local/bin
Installed /usr/local/lib/python3.7/dist-packages/pypilot-0.23-py3.7-linux-armv7l.egg
Processing dependencies for pypilot==0.23
Finished processing dependencies for pypilot==0.23
After this the pypilot openplotter app does not have a connection with the arduino anymore. So I uninstalled everything and installed the default openplotter app again.
I can control the pypilot with the default app and it is sync to arduino, just the WebApp does not work.