Posts: 7
Threads: 3
Joined: Jun 2019
Reputation:
0
Hello MX Tommy,
first of all my compliments for this amazing plugin!
I have a question: where can I edit the data (URL and skin) behind the "demo" button on the welcome page?
The same question also for the welcome text displayed, I would load my own data and text.
Thank you!
Toni Pezzoni from Italy, North Adriatic.
Posts: 327
Threads: 20
Joined: Apr 2016
Reputation:
10
(2021-02-07, 04:02 PM)tonipez Wrote: Hello MX Tommy,
first of all my compliments for this amazing plugin!
I have a question: where can I edit the data (URL and skin) behind the "demo" button on the welcome page?
The same question also for the welcome text displayed, I would load my own data and text.
Thank you!
Toni Pezzoni from Italy, North Adriatic.
The only thing you have to do is change the server address from the demo settings to localhost:3000.
Now it is connected to the SignalK server and you can change the items to your choice. All the items that are in SignalK.
Bram
Posts: 7
Threads: 3
Joined: Jun 2019
Reputation:
0
(2021-02-16, 04:08 PM)verkerkbr Wrote: (2021-02-07, 04:02 PM)tonipez Wrote: Hello MX Tommy,
first of all my compliments for this amazing plugin!
I have a question: where can I edit the data (URL and skin) behind the "demo" button on the welcome page?
The same question also for the welcome text displayed, I would load my own data and text.
Thank you!
Toni Pezzoni from Italy, North Adriatic.
The only thing you have to do is change the server address from the demo settings to localhost:3000.
Now it is connected to the SignalK server and you can change the items to your choice. All the items that are in SignalK.
Bram Thank you Bram, but my question is different, I explain better.
On the welcome page (the "tutorial" component), the very first you see at new connection, if you press the "Load Demo" button you charge a saple configuration and the connection is established to demo.signalk.org server.
Well, I want to change:
- the server behind the "Load Demo" button, i.e. the server on my LAN
- the instructions text, i.e. from english to italian
I need this not for me of course but for my customers, they don't know the architecture and usually don't read instructions...
Thank you!
Posts: 327
Threads: 20
Joined: Apr 2016
Reputation:
10
2021-02-16, 05:21 PM
(This post was last modified: 2021-02-16, 05:23 PM by verkerkbr.)
(2021-02-16, 04:55 PM)tonipez Wrote: (2021-02-16, 04:08 PM)verkerkbr Wrote: (2021-02-07, 04:02 PM)tonipez Wrote: Hello MX Tommy,
first of all my compliments for this amazing plugin!
I have a question: where can I edit the data (URL and skin) behind the "demo" button on the welcome page?
The same question also for the welcome text displayed, I would load my own data and text.
Thank you!
Toni Pezzoni from Italy, North Adriatic.
The only thing you have to do is change the server address from the demo settings to localhost:3000.
Now it is connected to the SignalK server and you can change the items to your choice. All the items that are in SignalK.
Bram Thank you Bram, but my question is different, I explain better.
On the welcome page (the "tutorial" component), the very first you see at new connection, if you press the "Load Demo" button you charge a saple configuration and the connection is established to demo.signalk.org server.
Well, I want to change:
- the server behind the "Load Demo" button, i.e. the server on my LAN
- the instructions text, i.e. from english to italian
I need this not for me of course but for my customers, they don't know the architecture and usually don't read instructions...
Thank you!
Hi Tonipez,
on another system on your lan, you can use SignalK and also MXTommy. Simply by using a browser (because it is HTML):
http://ip address (of the system where SignalK is running) :3000
Example:
My RPI has ip address 192.168.1.205 running the SignalK server.
If I'm another system on my lan and like to connect to the RPI SignalK server,
Use the browser: http://192.1.68.1.205:3000 and you get SignalK on the RPI. With more extensions, you get MxTommy direct. Otherwise via Webbaps in SignalK server.
Regards,
Bram
Posts: 7
Threads: 3
Joined: Jun 2019
Reputation:
0
(2021-02-16, 05:21 PM)verkerkbr Wrote: (2021-02-16, 04:55 PM)tonipez Wrote: (2021-02-16, 04:08 PM)verkerkbr Wrote: (2021-02-07, 04:02 PM)tonipez Wrote: Hello MX Tommy,
first of all my compliments for this amazing plugin!
I have a question: where can I edit the data (URL and skin) behind the "demo" button on the welcome page?
The same question also for the welcome text displayed, I would load my own data and text.
Thank you!
Toni Pezzoni from Italy, North Adriatic.
The only thing you have to do is change the server address from the demo settings to localhost:3000.
Now it is connected to the SignalK server and you can change the items to your choice. All the items that are in SignalK.
Bram Thank you Bram, but my question is different, I explain better.
On the welcome page (the "tutorial" component), the very first you see at new connection, if you press the "Load Demo" button you charge a saple configuration and the connection is established to demo.signalk.org server.
Well, I want to change:
- the server behind the "Load Demo" button, i.e. the server on my LAN
- the instructions text, i.e. from english to italian
I need this not for me of course but for my customers, they don't know the architecture and usually don't read instructions...
Thank you!
Hi Tonipez,
on another system on your lan, you can use SignalK and also MXTommy. Simply by using a browser (because it is HTML):
http://ip address (of the system where SignalK is running) :3000
Example:
My RPI has ip address 192.168.1.205 running the SignalK server.
If I'm another system on my lan and like to connect to the RPI SignalK server,
Use the browser: http://192.1.68.1.205:3000 and you get SignalK on the RPI. With more extensions, you get MxTommy direct. Otherwise via Webbaps in SignalK server.
Regards,
Bram I know all what you write. But I need another thing: I want to edit - modify the welcome page! I want to display different text and to connect to a different server when I click on "load demo"!
In other words: if for example tomorrow the server demo.serverk.org will change name, where is the file to edit the link behind the button?
If I want to add / modify text on that page, where is the file to change the content?
Thank you!
Posts: 292
Threads: 4
Joined: Mar 2016
Reputation:
9
Posts: 20
Threads: 3
Joined: Jan 2021
Reputation:
3
Posts: 7
Threads: 3
Joined: Jun 2019
Reputation:
0
(2021-02-16, 07:50 PM)holgerw Wrote: look here: https://forum.openmarine.net/showthread.php?tid=998
No, sorry. This link don't explain what I need.
I simply need to edit the Tutorial Component (the welcome page), NOT how to configure the browser to see data.
I need to change the text beginning with:
"Welcome to KIP!........... "
and change the name server behind the "Load Demo" button.
I repeat: I'm not asking how to configure the browser.
Thank you!
Posts: 327
Threads: 20
Joined: Apr 2016
Reputation:
10
(2021-02-21, 10:37 PM)tonipez Wrote: (2021-02-16, 07:50 PM)holgerw Wrote: look here: https://forum.openmarine.net/showthread.php?tid=998
No, sorry. This link don't explain what I need.
I simply need to edit the Tutorial Component (the welcome page), NOT how to configure the browser to see data.
I need to change the text beginning with:
"Welcome to KIP!........... "
and change the name server behind the "Load Demo" button.
I repeat: I'm not asking how to configure the browser.
Thank you!
I understand you to like to make an annoucement/introduction and then start MXTommy/Kip.
Make a program file with your message and then the command to start MXTommy direct.
It can simply be done with the command: firefox localhost:3000/@mxtommy/kip/#/page/0
Try this first in a terminal.
Bram
Posts: 292
Threads: 4
Joined: Mar 2016
Reputation:
9
Good finding - i also looked through the kip-source and did not find it this way.
Sometimes the Solution is so near.
Keep on & Greetings
Holger
|