Hi,
Here are my remarks
These are basically two separate things;
The basic value for temp which is used is Kelvin, we work in the SI system. You will see the same with pressure hPa versus Pa, and speed m/s
If you want to convert this for Node-red. there are other posts on this forum here where you can find how to convert
The instrumentpanel from signal-K is very basic. see https://github.com/signalk/instrumentpanel I don't know if it is possible to convert somewhere in the settings. If you know it let me know.
as you hope, i think it is this: https://github.com/tkurki/marinetrafficreporter
you can find some info about IP address and port for marine traffic on: http://www.marinetraffic.com/files/AIS_LOGGER_vS.pdf
Not tested, let me know if it works ;-)
Suc6 !
G.
Here are my remarks
Quote:Next i tried the Node-Red-Thing and opened a browser with the openplotter:3000/instrumentpanel-Link.
These are basically two separate things;
- Node-RED --> localhost:1880/# , Node-RED-dashboard localhost:1880/ui
- Signal-K output --> localhost:3000
Quote:i think its Farenheit? (291 instead of 19).
The basic value for temp which is used is Kelvin, we work in the SI system. You will see the same with pressure hPa versus Pa, and speed m/s
If you want to convert this for Node-red. there are other posts on this forum here where you can find how to convert
The instrumentpanel from signal-K is very basic. see https://github.com/signalk/instrumentpanel I don't know if it is possible to convert somewhere in the settings. If you know it let me know.
Quote:i found the "Signal K Browser Plugin" -Thing
as you hope, i think it is this: https://github.com/tkurki/marinetrafficreporter
you can find some info about IP address and port for marine traffic on: http://www.marinetraffic.com/files/AIS_LOGGER_vS.pdf
Not tested, let me know if it works ;-)
Suc6 !
G.