This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] With Openplotter 0.9.0 AIS does not work
#10
Hallo,
with OP 1.1.0 SDR AIS don't work.
if I type:
rtl_fm -f 161975000 -p 128 -s 48k | aisdecoder -h 127.0.0.1 -p 1 -a file -c mono -d -f /dev/stdin
respond:
 -a file -c mono -d -f /dev/stdin                                              

Found 1 device(s):
  0:  Realtek, RTL2838UHIDIR, SN: 00000001

Using device 0: Generic RTL2832U OEM
Found Rafael Micro R820T tuner
Tuner gain set to automatic.
Tuner error set to 128 ppm.
Tuned to 162227000 Hz.
oversampling input by: 21x.
Oversampling output by: 1x.
Buffer size: 8.13ms
Exact sample rate is: 1008000.009613 Hz
Create UDP thread
Created UDP thread
Main socket started! :-) Tuning enabled on UDP/6020
Sampling at 1008000 S/s.
Output at 48000 Hz.
Reply


Messages In This Thread
RE: [SOLVED] With Openplotter 0.9.0 AIS does not work - by kste - 2018-08-24, 02:16 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)