Sean. I now removed the nmea client in the web interface. That helped on the complaints about the nmea connections, but the wind data is still missing. See screenshots.
Could there be other issues further upstream in the nmea traffic? Im noticing that openCPN also appears to miss access to the Wind data... Could there be some particular format to my NMEA sentences concerning wind? The setup is a straight forward brand new B&G setup, successfully imported to SignalK... I don't see what could be the issue here...
BTW. It appears that pypilot connects to Victron as well as WISENET-QNO-7020R-E4302235E2A9 (battery monitor and masthead camera, respectively). Could that create some sort of "interference" with the wind data?
BTW2. All the "too long write pipe ..." and "read imu running too _slowly_ " messages... Any issues, or completely normal?
Leif
Could there be other issues further upstream in the nmea traffic? Im noticing that openCPN also appears to miss access to the Wind data... Could there be some particular format to my NMEA sentences concerning wind? The setup is a straight forward brand new B&G setup, successfully imported to SignalK... I don't see what could be the issue here...
BTW. It appears that pypilot connects to Victron as well as WISENET-QNO-7020R-E4302235E2A9 (battery monitor and masthead camera, respectively). Could that create some sort of "interference" with the wind data?
BTW2. All the "too long write pipe ..." and "read imu running too _slowly_ " messages... Any issues, or completely normal?
Leif
Code:
EEPROM SIGNATURE ok
gpsd connected
GPSD devices []
server add socket ('127.0.0.1', 56366)
read imu running too _slowly_ 0.035087999999859676 0.05
server add socket ('127.0.0.1', 56368)
sensors is running too _slowly_ 0.34103699999991477
signalk process 4068
signalkread token eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJkZXZpY2UiOiJweXBpbG90LTI1MTcwMjk3NDg5IiwiaWF0IjoxNjQ5NDQyMzY2LCJleHAiOjE2ODA5OTk5NjZ9.e7tqDVSlizLRBdWMKClwzpElwAkgM6BQK7frFViNDlY
signalk zeroconf service add endeligpi._http._tcp.local. _http._tcp.local.
signalk server found 192.168.1.242:80
signalk zeroconf service add Victron._http._tcp.local. _http._tcp.local.
signalk zeroconf service add WISENET-QNO-7020R-E4302235E2A9._http._tcp.local. _http._tcp.local.
signalk probe... 192.168.1.242:80
signalk found ws://192.168.1.242/signalk/v1/stream?subscribe=none
signalk connected to ws://192.168.1.242/signalk/v1/stream?subscribe=none
calibration loaded, starting 4059
too long write pipe 0.033670902252197266 pypilotServer pipe4[1] 21
too long write pipe 0.029482126235961914 pypilotServer pipe4[1] 21
too long write pipe 0.026315689086914062 pypilotServer pipe4[1] 21