[SOLVED] OP boot problem

[e-sailing]

Hello

thanks for releasing OP 0.10 which works nice on simple RPi 2. But as soon as I put on the UPS Pico Hat it won't boot anymore. After the colourful first boot screen, it tells

sh: can't  access tty; job control turned off

and drops out to an emergency prompt: /#

dmesg shows nothing suspicious, it stops after initializing USB.

Did you change anything with regard to the "normal" raspian boot sequence ?

The Pico needs to reserve GPIO 22 et 27 - are they used by any other process on OP 0.10 ?

OP 0.8 worked nicely with the Pico but : http://forum.openmarine.net/showthread.php?tid=384

Thanks in advance
Christian

The difference between 0.8 and 0.10 on gpio is the use of spi bus for mcp3008

mcp3008  Pin  
Din            19
Dout         21
CL            23
CE0          24

You can try if disable SPI helps. Menu->Preferences->Raspberry Pi Configuration->Interfaces