2017-05-07, 08:02 PM
(2017-05-07, 05:01 PM)e-sailing Wrote:Well, I didn't change the partition number in cmdline.txt It was and is /dev/mmcblk0p7 which is the root partition of OP. The problem IMHO opinion is rather the boot partition /dev/mmcblk0p6 which is not addressed ed by the bootloader.(2017-05-07, 03:09 PM)CVL Wrote: So the Pi with the Pico attached boots always the first partition, no matter what cmdline.txt says, or the partition.json in the SETTINGS partition. I asked on the Pîco forum if this is expected behaviour, I will report back.
Ok. So the problem is that you changed the cmdline.txt to:
As the manual shows in green letters. (noobs doesn't have a mmcblk0p2 partition so it can't start)Code:dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
It says you only should delete the red part. So it should look like this:
Code:dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
Could you please give me the link to the documentation, I couldn't find a hint to the partition numbers of NOOBS at the online manuat at gitbook.
Cheers