I see what you mean. The BME280 has appeared in the I2C window and displays three lines (pressure, temperature and humidity). I approved it in SignalK. In I2C I highlighted one of the sensor lines and clicked the Edit button which allowed me to select the applicable sensor name from the list. This then allocated the names for all three sensors.
The SignalK Dashboard shows four lines of connection activity. (defaults, two ws.xxxxxxxx and sk-simple-token-security-config
I opened PyPilot and click the Reconnect button and then approved it in SignalK. Back in the PyPilot window I selected sensors and selected Enable IMU only as I don't have an autopilot.
Back in the SignalK Dashboard one of the connection activity lines was underlined in yellow.
In PyPilot I could click the Calibration button which opened a calibration window along with the Scope and Client options. However the Services window has a line which states Detected IMU: None
If I move the module around simulating boat movement nothing happens.
The fig13 in the Jeremy Clark instructions is too small for me to read but it looks like the Dashboard has names for the activities (can't read them) and each is underlined in yellow which I assume means activity has been detected. I've now lost my sole yellow underline which suggests no activity is being detected.
The SignalK Dashboard shows four lines of connection activity. (defaults, two ws.xxxxxxxx and sk-simple-token-security-config
I opened PyPilot and click the Reconnect button and then approved it in SignalK. Back in the PyPilot window I selected sensors and selected Enable IMU only as I don't have an autopilot.
Back in the SignalK Dashboard one of the connection activity lines was underlined in yellow.
In PyPilot I could click the Calibration button which opened a calibration window along with the Scope and Client options. However the Services window has a line which states Detected IMU: None
If I move the module around simulating boat movement nothing happens.
The fig13 in the Jeremy Clark instructions is too small for me to read but it looks like the Dashboard has names for the activities (can't read them) and each is underlined in yellow which I assume means activity has been detected. I've now lost my sole yellow underline which suggests no activity is being detected.