2017-04-30, 06:10 AM (This post was last modified: 2017-04-30, 06:11 AM by Alpenskipper.)
Update:
The temperature in messages or emails is not converted in Celsius, they are still Kelvin.
The conversion in Unit settings is correct, in Signal K diagnostics the temperature is converted.
I2C sensors are buggy, they will be fixed on next update.
Kelvin is the default unit fro temperature in signal k. that means that all sensors should send this in kelvin. Signal k clients like Signal k diagnostic instruments panels are in charge of convert units but the signal k database of openplotter will be always in kelvin. Actions work always with the signal k database.
After the corrections of the ini Files and a reboot the sensors are working fine!
But...
In temperature and humidity the offsets are working, in pressure, the offset ist ignored.
No problem for most of the users, as they sail on the sea, but for me, momentarily sailing on lake constance in 400 m above sea level, I should add an offset of 46 to get the air pressure related to sea level.
In the Signal K Explorer, all conversions (C -> F) are done correctly. But the messages (e.g. Email) are sent unconverted. Any chance to change this behavior?
And one more question: Is the a "weather " recording, as is was in 0.8? Excel compatible Data logging would be great.