I've upgraded from 0.11.3 to 0.11.5 and I cannot see and set up the BMP180 I2C sensors.
Auto detection results in MS5611 at 0x76 and HTU21D at 0x40
I manually added BMP180 at 0x76 and set up signal K keys
When I run the SK diagnostic no information is appearing. It works fine in 0.8.0
I tried running in debug mode with following result "pi@openplotter:~ $ python /home/pi/.config/openplotter/openplotter.py
python: can't open file '/home/pi/.config/openplotter/openplotter.py': [Errno 2] No such file or directory
I have a pi 3 with no other addons
Auto detection results in MS5611 at 0x76 and HTU21D at 0x40
I manually added BMP180 at 0x76 and set up signal K keys
When I run the SK diagnostic no information is appearing. It works fine in 0.8.0
I tried running in debug mode with following result "pi@openplotter:~ $ python /home/pi/.config/openplotter/openplotter.py
python: can't open file '/home/pi/.config/openplotter/openplotter.py': [Errno 2] No such file or directory
I have a pi 3 with no other addons