Cable type

[christin]

I am looking for a cable from the Pypilot to the motor controller. I tried to order on eBay but they are not the right size. I am not sure what to look for.  I need a 10ft cable with the ends. 

Chtistin

[ReinierD]

For usb connexxion, you can take cat 6 cable. solder on usb connectors
Even non twisted works

[seandepagnier]

you can use phone cable, ethernet cable, or almost any 4 or more wire cable for this, the limitation is the wires being large enough to work with, the currents are only a few milliamps.