Hello,
Yes that's right. I did that.
Heel = 0
Now I load the boot.zuerst me a value anzeit. After a short time, the value is 0 again.
In the tab: Compass -> Calibration -> IMU
There, 3 values are displayed. pitch, roll and heel
the values are displayed correctly.
see image.
The boat is diagonally, but roll is almost 0. This is also correct.
But I would like the value heel displayed in signalk
Yes that's right. I did that.
Heel = 0
Now I load the boot.zuerst me a value anzeit. After a short time, the value is 0 again.
In the tab: Compass -> Calibration -> IMU
There, 3 values are displayed. pitch, roll and heel
the values are displayed correctly.
see image.
The boat is diagonally, but roll is almost 0. This is also correct.
But I would like the value heel displayed in signalk
Entschuldigung für mein Englisch. Es ist "deepl.com english"
PN bitte auf german.
PN bitte auf german.