2017-09-14, 03:34 PM
This is the powered hub I'm using.
Protronix 4 Port USB 3.0 Hub with 5V/2A Power Adapter
I'm not using an extension cable it's plugged directly into the separate powered hub.
I bought the DVB-T module new and am using the supplied antenna and it's plugged into the input jack. I was able to get signals on multiple channels during the calibration at the Marina.
Protronix 4 Port USB 3.0 Hub with 5V/2A Power Adapter
I'm not using an extension cable it's plugged directly into the separate powered hub.
I bought the DVB-T module new and am using the supplied antenna and it's plugged into the input jack. I was able to get signals on multiple channels during the calibration at the Marina.