Hi Paddy,
i have nmea2000 and not nmea0183.
I look in the sketch and i see also mqtt do need that ?
i will google on arduino and node red, this might be the solution, only how to get the information from the arduino to the node red server ?
i have nmea2000 and not nmea0183.
I look in the sketch and i see also mqtt do need that ?
(2017-11-03, 11:15 AM)jim321 Wrote: where do you want to display the data ?really wonderfull gauge display, where did you get the gauges ?
using node red it could be displayed on the dashboard, there would be no need for nema at all to arduino ..
you could do alarms text email ect..
sk data can be read and actions taken in N.R. and sent back to arduino to do something open close relays ect.
arduino can read analog sensors and take actions in node red , display,or other actions..
so the short answer is Node-Red..
you will need a usb hub eventually..
jim
https://www.dropbox.com/s/8vz16igfyydbx5g/Screenshot%202017-11-03%2006.28.35.png?
i will google on arduino and node red, this might be the solution, only how to get the information from the arduino to the node red server ?