2020-04-16, 11:58 AM
affinite
And, change the path name, try to to keep them to "SignalK standard":
"environment.inside.mainCabin.Wifi" shall be "environment.inside.mainCabin.temperature".
You also have "environment.inside.mainCabin.relativeHumidity" as example of the syntax.
You also should have your temp value from EspEasy in Kelvin, you have -69 in your example, I hope not... since then you are -69 degress below the absolute zero value ;-), impossible.
See in this link: http://signalk.org/specification/1.3.0/doc/vesselsBranch.html , search for "inside":
Citat:
/vessels/<RegExp>/environment/inside/[A-Za-z0-9]+/temperature
Units: K (Kelvin)
Description: Temperature
End of citat.
You also have this one in "json-format": https://github.com/SignalK/specification...mas/groups
For example, when setting navigation.state, what value to use? Check in that file, and you will see the "possible" values.
Not on my home computer for the moment, so can't give exact examples.
/Leif
(2020-01-13, 11:04 PM)leif Wrote: c -lu 55557 on the Pi does show data on port 55557Hi, don't grab the udp package in Node-Red? UDP package will update and create an signalk path according to the you have sent in, just use that one with one with a signalk-on-delta/signalk-subscribe element in node red, if you need to adjust/react on it. Else you are all clear, you will have the value in Signalk to be used.
And, change the path name, try to to keep them to "SignalK standard":
"environment.inside.mainCabin.Wifi" shall be "environment.inside.mainCabin.temperature".
You also have "environment.inside.mainCabin.relativeHumidity" as example of the syntax.
You also should have your temp value from EspEasy in Kelvin, you have -69 in your example, I hope not... since then you are -69 degress below the absolute zero value ;-), impossible.
See in this link: http://signalk.org/specification/1.3.0/doc/vesselsBranch.html , search for "inside":
Citat:
/vessels/<RegExp>/environment/inside/[A-Za-z0-9]+/temperature
Units: K (Kelvin)
Description: Temperature
End of citat.
You also have this one in "json-format": https://github.com/SignalK/specification...mas/groups
For example, when setting navigation.state, what value to use? Check in that file, and you will see the "possible" values.
Not on my home computer for the moment, so can't give exact examples.
/Leif