• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Temperature and pression are lost removing power
#1
I have sensor for temperature and pression and I can see the values in SK Diagnostic window.
If I remove power, on successive power up the pressure is reported zero and the temperature -271
The only way to have back the correct values is to open NMEA 0183 generator window, delete all listed sentences and hit the “opencpn  default” button.

Roberto


====
Open plotter 0.16.0 beta
Raspberry PI 3
Keyboard, mouse, video, GPS, Eth
  Reply
#2
it does that to me too but i get no data..go to i2c tab and press the restart button ..that works for me.
my gps drops out like that too i go to the nema0183 tab and select the auto gp and diagnose then it works again in SK..
it just needs a little kick in the ass sometimes..
  Reply
#3
Thank you for your reply.
Indeed, Restart for me does not work. I hope that this bug can be fixed in the next beta, or at least before the release of the version 1.0
OP 0.16
Rasp. PI 3
BMP280, MPU-9255, DS18d20, Eth, USB GPS

  Reply
#4
I will try to reproduce this, thanks.
  Reply
#5
did you need some video showing the problem?
Or I have to do some test?
Don't hesitate to ask.

Ciao
Roberto
OP 0.16
Rasp. PI 3
BMP280, MPU-9255, DS18d20, Eth, USB GPS

  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)