This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

A cookie will be stored in your browser regardless of choice to prevent you being asked this question again. You will be able to change your cookie settings at any time using the link in the footer.

Thread Rating:
  • 5 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Introducing OpenPlotter hats!!!
#1
We have been really busy lately.

We have reached agreements with Rooco and we have been working together on some stackable Raspberry Hats.

We are glad to announce 3 hats. We have named them as 3 of the most famous solo sailors of the modern age.


OpenPlotter Moitessier Hat (https://en.wikipedia.org/wiki/Bernard_Moitessier)

This hat contains the basic items to turn your raspberry into a complete navigation system.
[Image: moitessier-hat.jpg]

Features
    • High-sensitivity (better than -112 dBm) dual channel AIS receiver with SMA antenna connector.
    • High-performance GNSS receiver with integrated patch antenna and external antenna support via BNC connector.
    • Compass, heel and trim from gyroscope, accelerometer and magnetometer sensors (IMU).
    • Barometric pressure.
    • Standalone usage or in combination with Raspberry Pi (). Sensors are directly accessible via Raspberry Pi. Standalone usage requires 3.3V power supply and sensors are controlled by the HAT’s microcontroller.
    • Fully compatible with Raspberry Pi models supporting 40-pin IO header.
    • Data communication via SPI (AIS, GNSS and meta data) and via I2C (sensor data).Data accessible via device driver and device file.
    • Supports ID EEPROM and automatic device tree loading.
    • 3 status LEDs (AIS status, GNSS status, error).
    • Full OpenPlotter compatible. Plug and play.

State of development: available

Buy: http://shop.sailoog.com/openplotter/4-mo...r-hat.html

More info: www.rooco.eu

OpenPlotter Moitessier Hat Casing

Enclosure for Raspberry Pi 3 with Moitessier Hat

[Image: enclosure.png]

State of development: Production

Buy: http://shop.sailoog.com/openplotter/9-mo...-case.html

Release date: July 8, 2018. More info: www.rooco.eu

OpenPlotter MacArthur Hat (https://en.wikipedia.org/wiki/Ellen_MacArthur)

This hat provides a way to protect your SD card from corruption and allow you turn on and off your system.

Features
  • Uninterruptible Power Supply (UPS). Shutdown safely when the main power supply fails.
  • 9V-32V to 5V converter.
  • ...
State of development: Development.
Release date: ?


OpenPlotter Slocum Hat (https://en.wikipedia.org/wiki/Joshua_Slocum)

This hat makes easy and safe connecting all type of analog and digital sensors.

Features
  • Analog to Digital Converter (ADC)
  • Protected screw connectors for GPIO.
  • ...
State of development: Development.
Release date: ?


We will keep reporting progress Smile
Reply
#2
Wow!!!


That's fantastic, the world of nav computing on boats just changed!

Well done.  Cool Cool
Reply
#3
Amazing! I'm really looking forward to these hats!
Reply
#4
Moitessier, price?
And will this ship with software config instructions?
Reply
#5
Great news!!! Hope I can remember the hat names Wink - giving credit to co-developers is a noble gesture.
Please think also about a case for the rpi including these hats.

ref the McArthur hat consider something similar to the StromPi2 with the option to hook up Capacitors or LiPo cells for the UPS functionality. Bridging a few hours should be enough and then a warm standby (reduce to minimal functions and switch off the rest). Maybe you could also manage to embed a USBdrive to reduce the dependency on the SD card. By that lots of the shutdown issues are already minimized.
Reply
#6
When do you think they might be available? 


And what chip do you use to receive AIS?

This could be so handy for delivery skippers Cool
Reply
#7
(2017-11-21, 01:45 AM)vapochilled Wrote: Moitessier, price?
And will this ship with software config instructions?

We can not define a price yet because there is some details to decide. As cheap as possible Smile

Yes, there will be complete config instructions and support on this forum.
Reply
#8
(2017-11-21, 05:44 AM)SkipperEarly Wrote: Great news!!! Hope I can remember the hat names Wink - giving credit to co-developers is a noble gesture.
Please think also about a case for the rpi including these hats.

ref the McArthur hat consider something similar to the StromPi2 with the option to hook up Capacitors or LiPo cells for the UPS functionality. Bridging a few hours should be enough and then a warm standby (reduce to minimal functions and switch off the rest). Maybe you could also manage to embed a USBdrive to reduce the dependency on the SD card. By that lots of the shutdown issues are already minimized.

These names are from famous modern solo sailors. Added a link to wikipedia Smile

Enclosures will be the last step.

We are discussing the UPS hat right now. Capacitors option is wining but LiPo is not discharged yet.
Reply
#9
(2017-11-21, 11:20 AM)PaddyB Wrote: When do you think they might be available? 


And what chip do you use to receive AIS?

This could be so handy for delivery skippers Cool

Added more info and expected dates

The used chip is a narrow band receiver from ON Semiconductor (AX series) and definitely better than RTL-SDR chips.
Reply
#10
will it need to be mounted in flat face up orientation for the accelerometer and magnetometer sensors to work, calibrate ??
Reply


Forum Jump:


Users browsing this thread: 5 Guest(s)