Good day,
I'd like to get recommendations with the kind of hardware that I can use to transmit NMEA signals to Openplotter for wind and depth measurements.
Any other hardware recommendations to complete and prepare my setup for coastal cruising is highly appreciated.
I have my boat on the hard right now and wanted to implement Openplotter before I hit the water.
Thanks and regards,
Ze'K
While I'm at this topic. I'm going to list below hardware that I stumble upon as I continue my search and research. If possible, please let me know your experiences about specific devices that you have used or know about.
HARDWARE
WIND DATA
1.) WIND SENSOR
2.) AIRMAR WS-220WX
DEPTH, TEMP, AND SPEED DATA
1.) AIRMAR DST800B-A
AIS
1.) dAISY hat AIS receiver
HOW-TO'S AND TUTORIALS
1) Raspberry Pi as a NMEA wifi repeater
2) NMEA_WiFi_Bridge
I'd like to get recommendations with the kind of hardware that I can use to transmit NMEA signals to Openplotter for wind and depth measurements.
Any other hardware recommendations to complete and prepare my setup for coastal cruising is highly appreciated.
I have my boat on the hard right now and wanted to implement Openplotter before I hit the water.
Thanks and regards,
Ze'K
While I'm at this topic. I'm going to list below hardware that I stumble upon as I continue my search and research. If possible, please let me know your experiences about specific devices that you have used or know about.
HARDWARE
WIND DATA
1.) WIND SENSOR
2.) AIRMAR WS-220WX
DEPTH, TEMP, AND SPEED DATA
1.) AIRMAR DST800B-A
AIS
1.) dAISY hat AIS receiver
HOW-TO'S AND TUTORIALS
1) Raspberry Pi as a NMEA wifi repeater
2) NMEA_WiFi_Bridge
“One day your life will flash before your eyes. Make sure it’s worth watching.” ~ Unknown