• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[solved] BME280 bug
#1
Hello, everyone, 
I have connected a BME280 to my system (OP 0.17.0, RPI3, IMU 9255). 
Bugs: 
No temperature.
No humidity. 
Wrong air pressure. 
The air pressure is displayed with approx. 700 mbar. But this can't be true. With a BMP180 everything ran smoothly. Is the sensor faulty?
Are there any ideas for the bugs?

Jürgen

edit:
debugmode:
Signal K starting
*** WARNING *** The program 'node' uses the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node>
*** WARNING *** The program 'node' called 'DNSServiceRegister()' which is not supported (or only supported partially) in the Apple Bonjour compatibility layer of Avahi.
*** WARNING *** Please fix your application to use the native API of Avahi!
*** WARNING *** For more information see <http://0pointer.de/avahi-compat?s=libdns_sd&e=node&f=DNSServiceRegister>
signalk-server running at 0.0.0.0:3000

cat: /dev/ttyOP_SKVA: Datei oder Verzeichnis nicht gefunden

Cannot open NGT-1-A device /dev/ttyOP_N2K

Error reading /home/pi/.openplotter/public/mapcache
GET /signalk/v1/api/vessels/self 200 41.459 ms - 669
cat: /dev/ttyOP_SKVA
: Datei oder Verzeichnis nicht gefunden

Cannot open NGT-1-A device /dev/ttyOP_N2K
Angel  Entschuldigung für mein Englisch. Es ist "google english"
PN bitte auf german.  Big Grin
  Reply
#2
Hello, everyone,
I think I found the mistake. I ordered and connected a BMP280 from provided. I will order a BME280 now and hope it will be better or is there a way to use the BMP?
Greetings Jürgen
Angel  Entschuldigung für mein Englisch. Es ist "google english"
PN bitte auf german.  Big Grin
  Reply
#3
both should work bmp has no humidity, i have ordered bme's three different times and received bmp every time ..
check your connections
  Reply
#4
As already written,
Only the air pressure is displayed. And that is also far from a realistic value.
Everything else is displayed with the value 0. I checked all the connections. Everything's all right.
Angel  Entschuldigung für mein Englisch. Es ist "google english"
PN bitte auf german.  Big Grin
  Reply
#5
mine works fine all 3 of them i guess you got a bad one.
its not a problem with openplotter...must be your sensor..
  Reply
#6
Built in a new sensor.
Now everything is going as it should.
Angel  Entschuldigung für mein Englisch. Es ist "google english"
PN bitte auf german.  Big Grin
  Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)