I have had some problems with serial ports too. If I add a port and give it a name in one tab and try to reference it by that name in the next tab the named port isn't in the drop-down. Restarting kplex makes no difference. 0.17.0
Autoconfigure finds my nmea 0183 sources and I see the data scroll by, but when it adds what it found, the ports it adds timeout as you describe.
Using FTDI usb adapters, whether or not that matters.
Sent from my Moto G (5) Plus using Tapatalk
I should note I eventually got it working, I think I had to reboot the pi after each step of configuring the port or something.
Sent from my Moto G (5) Plus using Tapatalk
Autoconfigure finds my nmea 0183 sources and I see the data scroll by, but when it adds what it found, the ports it adds timeout as you describe.
Using FTDI usb adapters, whether or not that matters.
Sent from my Moto G (5) Plus using Tapatalk
I should note I eventually got it working, I think I had to reboot the pi after each step of configuring the port or something.
Sent from my Moto G (5) Plus using Tapatalk