2016-08-27, 07:59 PM
Hi guys, first my equipment: Ipad with InavX navigation, raspi 3, a usb connected nmea-seatalk bridge (translates all seatalk1 data to nmea183 and viceversa) and running OP 0.8.0. With this constellation i get all nav data from connected Raymarine StT60 instruments on my ipad/inavx. But i could not find a way to send the waypoint data to OP respectively to the ST60 autopilot via usb / nmea bridge. Send data via second tcp adress or different port like in the other thread with opencpn is not possible, see below screenshot from inavx. The yellow lines are the via TCP sended waypoints from InavX. Hoping you have a solution, best regards [attachment=58]